Saltgator
Saltgator
Injection Chomber x1
Control Base x1
Power Adapter x1
Clamp & Fixture Set x2
Multi-Size Nozzles x3
Instruction Book x1
Raw Material x1
SALTGATOR Special Molds x4
30-Day Trial ：We hope you'll love your products from the Saltgator Store, but if something isn't quite right, you can send it back with our flexible 30-day returns policy as long as it's in good working condition. We will provide you with a returns label and support local returns throughout the U.S. for easy, fast returns. Learn More
Free Shipping : We cannot ship to PO Boxes, APO/FPO addresses. Learn More
12-month warranty protection：our industry-leading 12-month warranty covers all electrical components as well. Learn More
Print softer than TPU with an injection molding machine by SALTGATOR. FDM TPU 3D printing has a softness ceiling where injection molding blows past it.
3D Prints You Might Not Have Thought To Try!
Enjoy our fishing and fish keeping aquarium diy catch em all fishing with Zak Catchem content!
THE FUTURE OF FISHING? I was blown away by these fishing products at iCast 2025.
I tested SALTGATOR, the world’s first desktop soft plastic injection machine. Is it safe? Easy? Worth it? Let’s walk through unboxing, setup, and some wild creations you can make!
More materials. More molds. More freedom-all from your desktop.
176–410 °F (80–210 °C),
compatible with various injection materials
You Choose Soft-touch parts, flexible components, or mixtextures - One for all.
Experiment freely with forms, setups, and materials - no industrial lock-in.
| Item | Specification |
|---|---|
| Heating Temperature Range | 176–410 °F (80–210 °C) |
| Effective Barrel Capacity | 4 fl oz (118 mL) |
| Adapter Input | AC 100–240 V, 50/60 Hz |
| Adapter Output / Device Input | DC 32 V, 4 A |
| Rated Power Consumption | 128 W (max) |
| Product Dimensions (Assembled) | 325 × 156 × 140 mm |
| Product Weight | 1.1 kg (2.43 lb) |
| Operating Temperature | 32–104 °F (0–40 °C) |
| Recommended Operating Environment | Dry, well-ventilated indoor area |
| Thermal Insulation Material | 6 mm aerogel composite thermal insulation material |
| Housing Material | PPS reinforced with 30% glass fiber (PPS + 30% GF) |
| Injection Chamber Dimensions | 276 × 88 × 86 mm |
| Control Base Dimensions | 153 × 137 × 86 mm |
Absolutely. SALTGATOR is designed for makers—our system works with 3D-printed molds made from PLA, PETG, or resin. You can design your own or use pre-made files from our Mold Library.
We offer a dedicated platform: moldlibrary.saltgator.com, where you can freely explore, download, remix, or share 3D mold files for SALTGATOR. It’s open to all and built for creativity.
Yes, you can try third-party materials like plastisol or other soft thermoplastics. Just note that heating temps and safety may vary. For best results and guaranteed performance, we recommend our SoftGel formula.
We currently offer three levels of hardness: 0A (very soft), 20A (medium), and 40A (firm). You can mix or swap between them depending on your application—from soft lures to cosplay grips.
Yes. We’ll provide full nozzle dimension specs so you can design molds that fit perfectly. You can also use pre-aligned mold case options for convenience.
No—SALTGATOR is not built for rigid plastics. It's optimized for soft, flexible materials. However, you can embed rigid parts into your molds and inject SoftGel around them for hybrid results.
3D printing soft objects is slow and limited in material softness. SALTGATOR allows you to inject ultra-soft to semi-rigid materials quickly, consistently, and with better finish. Plus, our SoftGel is reusable.
Yes. Our sealed chamber keeps everything tidy. After use, the leftover SoftGel cools and solidifies—just pull out the residue as a single piece. No water or chemical cleaning required.
Yes! SALTGATOR is designed with recyclability in mind. You can reheat and reuse SoftGel multiple times without toxic fumes or material breakdown.
You can contact us anytime at hello@saltgator.com or join our community on Discord https://discord.gg/93EydfRVUD for faster responses, project sharing, and support.
